Recently Added Used CNC and Manual Machine Tools Of All Types

You Can Sort The Table Below By Clicking on The Column Header (table pre-sorted by Manufacturer then Model)

Click On The Machine ID Number Below To View Machine Quote

ManufacturerModelYearMachine IDType MachineControlConditionU / PPhotosShortSpecsList
Honor SeikiVL-160C201316559BORING MILLS, VERTICAL and VTL, CNC W-ATCFanuc 18iTVery GoodYesYes 2013 Honor Seiki VL-160C Fanuc 18iT
HenningKMO-0320199716569CONVEYORS, STEEL SLAT and CHIP Very GoodYesYesLength From End to Bend 66", Bend to Discharge 30", Length Over-All 96", Width of Belt Opening 11"1997 Henning KMO-0320
SchutteWU-306L200616564GRINDERS, TOOL and CUTTER, NC-CNCSiemens 840DGoodYesYesMax. Tool Dia. .3937", Length 6", Travels 15.75" x 9.85" x 9.85" , A-Axis 360°, C-Axis Swivel 225°, HSK 50, 12,000 RPM, 20 HP2006 Schutte WU-306L Siemens 840D
DoosanPuma-300 LC200516602LATHES, CNC, 2-AXIS, UNIVERSALFanuc 21iTBVery GoodYesYes23.2" Swing, 17.7" SOC, 15.75" Turning Dia., 52.4" Turning Length, 2,800 RPM, 4.53" Spindle Bore, 35 HP, Chip Conveyor, Tailstock, Two (2) Speed Geared Head, 12" 3-Jaw Hydraulic Chuck2005 Doosan Puma-300 LC Fanuc 21iTB
DoosanPuma-400 B201316578LATHES, CNC, 2-AXIS, UNIVERSALDoosan Fanuc iVery GoodYesYesSwing 30.3", Swing Over Cross Slide 23.2", Maximum Turning Diameter 22.4", Length 41.1", 4.6" Bar Cap., 1,500 RPM, 50 HP, 12 Sta. Turret, Tailstock, 18" 3-Jaw Chuck, Chip Conveyor, Tailstock, Tool Setter, Two (2) Speed Geared Head, Very Low Hours....2013 Doosan Puma-400 B Doosan Fanuc i
DoosanPuma-400 B200516560LATHES, CNC, 2-AXIS, UNIVERSALFanuc 21iTBVery GoodYesYesSwing 30.3", Swing Over Cross Slide 23.2", Maximum Turning Diameter 22.4", Length 41.1", 4.6" Bar Cap., 2,000 RPM, 50 HP, 12 Sta. Turret, Tailstock, 18" 3-Jaw Chuck, Chip Conveyor, Programmable Tailstock, Tool Setter, Two (2) Speed Geared Head, Very Low Hours....2005 Doosan Puma-400 B Fanuc 21iTB
HaasST-20T201016594LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlVery GoodYesYesSwing 31.75", Swing Over Cross Slide 20.75", Maximum Turning Diameter 15", Length 20.5", 2" Bar Cap., 4,000 RPM, 20 HP, 12 Sta. Turret, Tailstock, 8" 3-Jaw Chuck, Chip Conveyor, Tool Setter, Low Hours, More...2010 Haas ST-20T Haas Control
HaasTL-3B200716579LATHES, CNC, 2-AXIS, UNIVERSALHaas ControlGoodYesYesSwing 30", Swing Over Cross Slide 18.5", Maximum Turning Diameter 30", Length 60", 8.5" Bar Cap., 650 RPM, 30 HP, 4 Sta. Post, Tailstock, Two (2) 25" 3-Jaw Chucks, Tailstock, Two (2) Speed Geared Head, More..2007 Haas TL-3B Haas Control
MazakQuick Turn Universal-350201616606LATHES, CNC, 2-AXIS, UNIVERSALMazatrol SmartVery GoodYesOn Way27.40" Swing, 20.87" SOC, 16.25" Turning Dia., 19.96" Turning Length, 3,500 RPM, 3" Bar Cap., 30 HP, Chip Conveyor, 10" 3-Jaw Hydraulic Chuck, Chip Conveyor2016 Mazak Quick Turn Universal-350 Mazatrol Smart
MazakSlant Turn-60 U - 3000201116581LATHES, CNC, 2-AXIS, UNIVERSALMazatrol Matrix IIVery GoodYesYes36.02" Swing, 27" SOC, 500 RPM, 14.5" Bar Cap., 60 HP, 10 Sta. Turret, New 26” 4-Jaw Manual Chuck Front, New Pneumatic 3-Jaw Chuck Rear, Chip Conveyor, More2011 Mazak Slant Turn-60 U - 3000 Mazatrol Matrix II
Mori-SeikiSL-400 B - 2000200016601LATHES, CNC, 2-AXIS, UNIVERSALMori-Seiki MSC-501GoodYesYes36" Swing, 29" SOC, 25" Turning Dia., 79" Turning Length, 2,400 RPM, 4.5" Spindle Bore, 40 HP, Chip Conveyor, Tailstock, Two (2) Speed Geared Head, 15" 3-Jaw Hydraulic Chuck2000 Mori-Seiki SL-400 B - 2000 Mori-Seiki MSC-501
Mori-SeikiSL-603 B - 1000200716563LATHES, CNC, 2-AXIS, UNIVERSALMori-Seiki MSX-501 (Fanuc 18iM)Very GoodYesYes 2007 Mori-Seiki SL-603 B - 1000 Mori-Seiki MSX-501 (Fanuc 18iM)
DoosanLynx-220 LYC201716574LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc i SeriesExcellentYesYes23.6" Swing, 11.8" Turn Dia., 20.1" Turn Length, 4,500 RPM, 20 HP, 12 Stations, 8" 3-Jaw Hydraulic Chuck, Tool Setter, Chip Conveyor, More.2017 Doosan Lynx-220 LYC Fanuc i Series
DoosanPuma-2000 SY200716580LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc 31iVery GoodYesYes23.622" Swing, 21.6535" SOC, 5,000 RPM, 2.625" Bar Cap., 20 HP, 12 Sta. Turret, 8" 3-Jaw Chuck on Main Collet Chuck on Sub, Parts Catcher, Bar Feed, Chip Conveyor, More2007 Doosan Puma-2000 SY Fanuc 31i
DoosanPuma-2500 LY201116550LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc 18iTBVery GoodYesYes 2011 Doosan Puma-2500 LY Fanuc 18iTB
DoosanPuma-2600 M201216575LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc OiTDVery GoodYesYes30.7" Swing, 24.8" Turn Dia. Chucking, 29.9", Shaft 14.8", 29.9" Turn Length, 4,500 RPM, 30 HP, 12 Stations, 10" 3-Jaw Hydraulic Chuck, Tool Setter, Chip Conveyor, Parts Catcher, LNS Quick Load Bar Feed, More.2012 Doosan Puma-2600 M Fanuc OiTD
HwacheonHi-Tech 450 AYLMC201216576LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc OiTDVery GoodYesYes27.56" Swing, 16.54" Turn Dia., 53.15" Turn Length, 3,500 RPM, 30 HP, 12 Stations, 10" 3-Jaw Hydraulic Chuck, Tool Setter, Chip Conveyor, Tailstock, More.2012 Hwacheon Hi-Tech 450 AYLMC Fanuc OiTD
MazakQuick Turn Nexus-300 M200716599LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol MatrixVery GoodYesYesSwing 29.5", Swing Over Cross Slide 19.88", Maximum Turning Diameter 16.53", Length 48", 3" Bar Cap., 4,000 RPM, 35 HP, 12 Sta. Turret, Tailstock, 10" 3-Jaw Chuck, Chip Conveyor, Live Tooling, More..2007 Mazak Quick Turn Nexus-300 M Mazatrol Matrix
Mori-SeikiTL-40 MC - 3000198816605LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc 6TBFairYesYes24" Swing, 14.9" SOC, 17.3" Turning Dia., 114.4" Turning Length, 2,000 RPM, 3.6" Bar Cap., 30 HP, Chip Conveyor, One (1) Steady Rest, Chip Conveyor1988 Mori-Seiki TL-40 MC - 3000 Fanuc 6TB
OkumaLB-300 M200016561LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGOSP-U100LGoodYesYes 2000 Okuma LB-300 M OSP-U100L
DMG MoriNLX-2000 SY201616603LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki CelosExcellentYesYes36.37" Swing, 29.72" SOC, 14.01" Turning Dia., 19.6" Turning Length, 5,000 RPM, 2.5" Bar Cap., 30 HP, Chip Conveyor, Bar Feed Interface, Twenty (20) Station Turret Option, More..2016 DMG Mori NLX-2000 SY Mori-Seiki Celos
DMG MoriNLX-2500 SY - 700201116585LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-853 IVVery GoodYesYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.4", Length 27.75", 4,000 RPM, 3.1" Bar Cap., 25 HP, 12 Sta. Turret, Parts Catcher, Bar, More.2011 DMG Mori NLX-2500 SY - 700 Mori-Seiki MSX-853 IV
DoosanPuma-2600 SY201816548LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 31iTDExcellentYesYes 2018 Doosan Puma-2600 SY Fanuc 31iTD
HaasDS-30 SSY201116558LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEHaas ControlVery GoodYesYesSwing Over Bed 31.75", Swing Over Saddle 20.75", Maximum Turning Diameter 16", Length 18", 4,800 RPM, 30 HP, 12 Sta. Turret, Y-Axis, Sub-Spindle, Live Tooling, More..2011 Haas DS-30 SSY Haas Control
Hyundai-KiaSKT-21 LMS200916583LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc OiTCVery GoodYesYesSwing 21.7"", Swing Over C.S. 13.8", Maximum Turning Diameter 10.2", Length 20.87", 4,000 RPM, 2.56" Bar Cap., 20 HP, 12 Sta. Turret, Parts Catcher - Conveyor, Bar Feed Interface, More.2009 Hyundai-Kia SKT-21 LMS Fanuc OiTC
MazakIntegrex 200 SY200016572LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 MTGoodYesYes20.87" Swing, 19.69" Turn Dia., 30" Turn Length, 5,000 RPM, 30 HP, 40 ATC, 8" 3-Jaw Hydraulic Chuck, Coolant Through Tool2000 Mazak Integrex 200 SY Mazatrol Fusion 640 MT
Mori-SeikiNLX-2500 SY - 700201316567LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki M730BMVery GoodYesYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.4", Length 27.75", 4,000 RPM, 3.1" Bar Cap., 35 HP, 12 Sta. Turret, Parts Catcher, Bar Feed Interface, More.2013 Mori-Seiki NLX-2500 SY - 700 Mori-Seiki M730BM
Mori-SeikiSL-154 SY200216586LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSG-805Very GoodYesYesSwing / Swing Over Cross Slide - 26.8" / 20.1", Maximum Turning Diameter / Length - 11.8" / 13.7", 6,000 RPM Main & Sub, 10 HP, 1.77" Bar Capacity, Collet Chuck on Main and Sub-Spindles, Bar Feed Interface, Bar Feed, Auto Parts Catcher, More..2002 Mori-Seiki SL-154 SY Mori-Seiki MSG-805
DoosanPuma-TT-1800 SY200716547LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBGoodYesYes 2007 Doosan Puma-TT-1800 SY Fanuc 18iTB
Mori-SeikiMT-2500 SZ200516600LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-501 (Fanuc 18iM)Very GoodYesYesSwing 35.8", Swing Over Cross Slide 23.62", Maximum Turning Diameter 21.1", Length 60.19", 2.99" Bar Cap., 4,500 RPM, 25 HP, 60 Sta. ATC, Chip Conveyor, Live Tooling, More..2005 Mori-Seiki MT-2500 SZ Mori-Seiki MSX-501 (Fanuc 18iM)
Nakamura-TomeWY-250 L201316565LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 31iAExcellentYesYesSwing 11.2", Swing Over C.S. 9.84", Maximum Turning Diameter 8.9", Length 35.8", Y-Axis, 4,500 RPM, 25 HP, 2 - 24 Sta. Turrets, Sub Spindle, Full C-Axis, Collet Chucks Both Spindles, Chip Conveyor, Much More.2013 Nakamura-Tome WY-250 L Fanuc 31iA
OkumaLT-2000 EX201116597LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEOSP-P200LAGoodYesYesSwing 15.75", Swing Over Cross Slide 12.2", Maximum Turning Diameter 8.27", Length 21.26", 2.75" Bar Cap., 6,000 RPM, 30 HP, 12 Sta. Turret, 6" 3-Jaw Hydraulic Chucks, Chip Conveyor, More…2011 Okuma LT-2000 EX OSP-P200LA
MazakIntegrex 100 IV ST200616592LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLEMazatrol MatrixVery GoodYesYesSwing 21.46", Maximum Turning Diameter 21.46", Maximum Length 29.65", 6,000 RPM Main & Sub, 15 HP, 2" Bar Capacity, 6" 3-Jaw Hydraulic Chucks, Coolant Through Tool, Much More..2006 Mazak Integrex 100 IV ST Mazatrol Matrix
DoosanHM-6300200816584MACHINING CENTERS, HORIZONTAL CNCFanuc 18iMBGoodYesYes 2008 Doosan HM-6300 Fanuc 18iMB
DoosanHP-5100201516566MACHINING CENTERS, HORIZONTAL CNCFanuc 31iMBExcellentYesYes19.7" x 19.7" Pallets, 33.5" x 27.6" x 29.5", 14,000 RPM, 40 Taper, 30 HP, 60 ATC, Chip Conveyorr, RS-232 Port, Rigid Tapping, Spindle Chiller, Coolant Through Spindle, More....2015 Doosan HP-5100 Fanuc 31iMB
DoosanHP-5100201016587MACHINING CENTERS, HORIZONTAL CNCFanuc 31iMAGoodYesYes19.7" x 19.7" Pallets, 33.5" x 27.6" x 29.5", 14,000 RPM, 40 Taper, 30 HP, 60 ATC, Chip Conveyorr, RS-232 Port, Rigid Tapping, Spindle Chiller, Coolant Through Spindle, More....2010 Doosan HP-5100 Fanuc 31iMA
HaasEC-400200816571MACHINING CENTERS, HORIZONTAL CNCHaas ControlExcellentYesYesTwo 15.75" Pallets, 20" x 20" x 20" Travels, 8,000 RPM, 40 Taper, 30 HP, 30 ATC, Chip Auger, Spindle Orientation, Coolant Through Spindle, More.2008 Haas EC-400 Haas Control
HaasHS-1RP200116604MACHINING CENTERS, HORIZONTAL CNCHaas ControlGoodYesYes15.7" x 15.7" Pallets, 24" x 20" x 22", 10,000 RPM, 40 Taper, 30 HP, 24 ATC, Chip Auger, RS-232 Port, Rigid Tapping, Coolant Through Spindle, Remote Jog Handle, 1 Meg Memory, Spindle Orientation, Macros, Quick Code, Coordinate Rotation and Scaling, Two (2) Seepd Geared Head, Brushless Servos, Coolant Filtration System2001 Haas HS-1RP Haas Control
Hyundai-WiaHS-4000i201316577MACHINING CENTERS, HORIZONTAL CNCFanuc 32iAExcellentYesYesTwo 15.8" Pallets, 24.4" x 22" x 25.6" Travels, 12,000 RPM, 40 Taper, 33.5 HP, 80 ATC, Chip Conveyor, High Pressure Coolant Through Spindle, Renishaw Probing, More.2013 Hyundai-Wia HS-4000i Fanuc 32iA
Hyundai-WiaHS-500201116573MACHINING CENTERS, HORIZONTAL CNCFanuc 31i A5ExcellentYesYesTwo 19.7" Pallets, 33" x 27" x 29" Travels, 15,000 RPM, 40 Taper, 25 HP, 60 ATC, Chip Conveyor, High Pressure Coolant Through Spindle, More.2011 Hyundai-Wia HS-500 Fanuc 31i A5
MakinoA-51200516598MACHINING CENTERS, HORIZONTAL CNCFanuc Pro 5GoodYesYes15.7" x 15.7" Pallets, 20.05"" x 20.05" x 23.6", 12,000 RPM, 40 Taper, 20 HP, 60 ATC, Chip Conveyorr, RS-232 Port, Rigid Tapping, Spindle Chiller, Coolant Through Spindle, More.2005 Makino A-51 Fanuc Pro 5
ToyodaFH-630 S200416549MACHINING CENTERS, HORIZONTAL CNCFanuc 30iGoodYesYesTwo (2) 24.8" x 24.8" Pallets, 360,000° Indexing, 39.37" x 31.50" x 33.46" Travels, 15,000 RPM, 50 Taper, 30 HP, 40 ATC, Coolant Through Spindle, Chip Conveyor, Royal Filtermist Mist Collector, More2004 Toyoda FH-630 S Fanuc 30i
DaewooDMV-4020200216556MACHINING CENTERS, VERTICAL, CNCFanuc 21iMVery GoodYesYes47.6" x 19.7" Table, 40.1" x 20.1" x 24.6" Travels, 8,000 RPM, 40 Taper, 20 HP, 30 ATC, Coolant Through Spindle, Rigid Tapping,  Probing, Midaco Pallet Changer, SMW Indexer, More.2002 Daewoo DMV-4020 Fanuc 21iM
DoosanMV-4020L200716562MACHINING CENTERS, VERTICAL, CNCFanuc OiVery GoodYesYes 2007 Doosan MV-4020L Fanuc Oi
HaasMini-Mill200516595MACHINING CENTERS, VERTICAL, CNCHaas ControlVery GoodYesYes28.75" x 12" Table, 16" x 12" x 10" Travels, 6,000 RPM, 40 Taper, 10 ATC, RS-232 Port, Rigid Tapping, More..2005 Haas Mini-Mill Haas Control
HaasSuper Mini-Mill200516596MACHINING CENTERS, VERTICAL, CNCHaas ControlVery GoodYesYes36" x 12" Table, 16" x 12" x 10" Travels, 10,000 RPM, 40 Taper, 10 ATC, RS-232 Port, Rigid Tapping, More..2005 Haas Super Mini-Mill Haas Control
HaasVF-2201416589MACHINING CENTERS, VERTICAL, CNCHaas ControlExcellentYesYes36" x 14" Table, 30" x 16" x 20" Travels, 10,000 RPM, 40 Taper, 20 HP, 40 ATC, Rigid Tapping, 4th & 5th Axis Interface, Wireless Intuitive Probing, Coordinate Rotation and Scaling, Haas TR-160 Tilt Rotary, More....2014 Haas VF-2 Haas Control
HaasVF-2201716588MACHINING CENTERS, VERTICAL, CNCHaas ControlVery GoodYesYes36" x 14" Table, 30" x 16" x 20" Travels, 10,000 RPM, 40 Taper, 30 HP, 20 ATC, Rigid Tapping, Through Tool Air Blast, More....2017 Haas VF-2 Haas Control
HaasVF-6-40200416557MACHINING CENTERS, VERTICAL, CNCHaas ControlVery GoodYesYes64" x 28" Table, 64" x 32" x 30" Travels, 10,000 RPM, 40 Taper, 20 HP, 24 ATC, Programmable Coolant, Rigid Tapping, Probing, More.....2004 Haas VF-6-40 Haas Control
HaasVF-8-40200716607MACHINING CENTERS, VERTICAL, CNCHaas ControlGoodYesYes64" x 36" Table, 64" x 40" x 30" Travels, 10,000 RPM, 30 HP, 40 Taper, 40 ATC, Chip Auger, Linear Scales, Programmable Coolant, Quick Code, 4th Axis Ready, WIPS, Geared Head, More2007 Haas VF-8-40 Haas Control
Hyundai-KiaVMX-650200816555MACHINING CENTERS, VERTICAL, CNCFanuc 18iMBVery GoodYesYes63" x 25.5" Table, 55.1" x 25" x 25" Travels, 10,000 RPM, 40 Taper, 20 HP, 24 ATC, Rigid Tapping, Coolant Through Spindle, More2008 Hyundai-Kia VMX-650 Fanuc 18iMB
MakinoS56200316590MACHINING CENTERS, VERTICAL, CNCMakino Pro 3Very GoodYesYes 2003 Makino S56 Makino Pro 3
MazakNexus VCN-510C II201216593MACHINING CENTERS, VERTICAL, CNCMazatrol Matrix IIVery GoodYesYes51.18" x 21.65" Table, 41.34" x 20.08" x 20.08" Travels, 12,000 RPM, 40 Taper, 20 HP, 30 ATC, Coolant Through Spindle, Rigid Tapping, Tool Life Monitoring, More..2012 Mazak Nexus VCN-510C II Mazatrol Matrix II
Hyd-MechS-20A200116553SAWS, BAND, HORIZONTAL Very GoodYesYes13" x 18" Capacity, 13" Round, 5 HP, Miter, Coolant Tank and Pump, Variable Vise Pressure, Positive Downfeed, Powered Blade Brush, Out of Stock Limit Switch, PLC Control, More....2001 Hyd-Mech S-20A
TrionMP-2400 16552SMOKE COLLECTORS GoodYesYes  Trion MP-2400
HaasHA-5C200216582TABLES, ROTARY GoodYesYesCollet Capacity 1/64" to 1 1/16", B-Axis (Rotary), 360,000°, Manual Collet Closer2002 Haas HA-5C
HaasHA-5C200016551TABLES, ROTARY Very GoodYesYesCollet Capacity 1/64" to 1 1/16", B-Axis (Rotary), 360,000°, Manual Collet Closer, Haas Controller (505338), Brush Style2000 Haas HA-5C





Terms and Conditions

Machine Tools 24/7 Terms and Conditions - Click On Link Below.

Contact Us

Machine Tools 24/7
Phone - 352-799-8398
Fax - 352-799-0315

Email - sales@usedcncmachinestools.com

Additional Services

The Machine Tools 24/7 Staff is Here To Help Make Your Machine Tool Purchase Go Smoothly.